POR EPOXY PUTTY™

'Unbelievable', that's what restorers say when they see a demonstration of this incredible EPOXY PUTTY product.

It's so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers.

And since it's WATER BASED, you can simply wet your fingers, and work with it until it is almost perfectly smooth before it dries - eliminating most sanding! But when it cures, it's ROCK HARD, making it perfect for repairing steel, plastics, concrete, etc. Amazingly, it even sticks to damp surfaces, and will cure UNDERWATER, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures and so much more. Put some EPOXY PUTTY in your toolbox today. You'll find yourself using it all over your shop and home.

Downloadable Files

EPOXY PUTTY Information Sheet

FIRESEAL 2000™

For years we've been working on a product to repair cracks, pits or holes in exhaust manifolds, tailpipes, mufflers, or other components subjected to high temperatures while in use. Because replacement parts are often difficult or impossible to find, there is a real need for this type of product in the marketplace. FIRE SEAL 2000™ is a single-component (no mixing required) ceramic and stainless steel-filled putty that is resistant to fuels, oils, and corrosives. After it is fully cured, it will withstand temperatures up to 2000° F. FIRE SEAL 2000™ may be applied to rough-surfaced or sandblasted steel, stainless steel, or cast iron.

Instructions: Use a putty knife, small trowel or spatula to apply. Curing: Let FIRE SEAL 2000™ dry for 16-24 hours. Begin final cure by idling engine for 10-15 minutes at a time. You may sand FIRE SEAL 2000™ after it is fully cured, using a file or medium grit sandpaper. Do not use any lubricants for machining, but always use a dust mask to avoid inhaling the sanding dust.

Downloadable Files

Fire Seal Instructions

POR PATCH™

For years our customers have asked us for a thicker version of our world-famous POR-15® for filling seams or holes. Here it is! POR PATCH™ is, quite literally, POR-15® in a tube, and like POR-15® it dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents. It's so tough it actually adds strength to weakened metal. And it won't absorb moisture and swell like conventional body fillers. Try it yourself, it's incredible!

Available in Black or Pearl White

Downloadable Files

POR PATCH Instructions

StraightLine™ Body Filler

Our new body fillers stick to POR-15 Rust Preventive Paint like nothing you've ever seen! They are formulated especially for application and use with POR-15 Rust Preventive Paint, and are manufactured exclusively for POR-15 Inc. We guarantee you'll say they're the best you've ever used or your money back....period! Yes, they're more expensive than fillers you can buy locally, and not by just a little... but if you've used body filler before, try ours; you'll know at once you've made a great buy. If you're a first-timer, ours are the easiest to use body fillers made anywhere.

STRAIGHTLINE™ BODY FILLER has over 30% more resin than other fillers, which gives it much greater adhesion. This makes it the perfect choice to apply over POR-15. STRAIGHTLINE™ has ultra fine particles for perfect feathering of edges, and is manufactured under vacuum, which eliminates those pesky air holes you've experienced with other fillers. It's more flexible, tougher, and able to tolerate higher temperatures than other fillers (you can even use it in a bake oven!) Use STRAIGHTLINE™ BODY FILLER for steel, aluminum, galvanized steel, fiberglass, and many plastics.

Give it a try!

RestoGRIP™ Body Filler

For tough applications use the toughest filler: RestoGRIP™ !

RestoGRIP™ Body Filler is specifically designed for applications that require more strength, such as bridging holes, or filling high-stress areas. RestoGRIP™ Body Filler is loaded with tiny polyester fibers, which makes it many times stronger than ordinary body fillers. Use RestoGRIP™ with POR-15®, to make permanent repairs to rust holes or deep pits in steel or galvanized steel. Then, use STRAIGHTLINE™ BODY FILLER to finish off the repair for the ultimate smooth final finish.

Now you've got the superior body fillers you always wanted, engineered for use with POR-15®. Try them for yourself! After you've worked so hard on your car, does it make any sense to use an inferior body filler that costs a few bucks less? Both STRAIGHTLINE™ and RestoGRIP™ are supplied in special tins which house the body filler in the bottom and the re-sealable hardener in an insert tray on top....no separate tubes to lose.

Downloadable Files

RestoGrip Instructions

Imperial Restoration, Inc.
Authorized Distributer of POR-15 Products
7550 E Rice Road
Gardner, IL 60424
toll free: 800-576-5822
phone: 815-237-8678
fax: 815-237-8707
email: sales@imperialrestoration.com